TEPCO removes section of radiation cover above Fukushima reactor building

oct 31 2014 reactor 1 A panel is lifted by crane at the No. 1 reactor building of the

Fukushima No. 1 nuclear power plant in Okuma, Fukushima Prefecture, on Oct. 31

November 01, 2014

OKUMA, Fukushima Prefecture–Tokyo Electric Power Co. has removed part of the canopy above a reactor building at the crippled Fukushima No. 1 nuclear power plant to gauge the effects of anti-scattering agents pumped inside.

It was the first time in three years that debris inside the No. 1 reactor building was visible from the outside. The structure, which was destroyed in a hydrogen explosion a day after the Great East Japan Earthquake and tsunami on March 11, 2011, was covered with the canopy in October of that year.

The removal on Oct. 31 of one of six panels that make up the canopy is the initial stage in work to remove debris and nuclear fuel from inside the structure.

TEPCO drilled holes into the panel, which measures 42 meters by 7 meters and weighs 32 tons, on Oct. 22. It then sprayed anti-scattering resin inside to prevent radioactive substances from stirring up into the air.

The panel was removed to survey the effects of the resin.

The work was performed by a large crane that slowly hoisted the panel and lowered it to the ground, taking about one hour and 40 minutes.

The panel is scheduled to be returned by the end of November. TEPCO plans to start dismantling the entire canopy on a full-fledged basis in March 2015.

Source: Asahi Shimbun


Fukushima Unit 1 Had Part Of Cover Removed


Oct 31, 2014

Tepco on Friday cracked open the cover over the reactor 1 building at the Fukushima No. 1 nuclear plant.

The covering was installed in a bid to contain radioactive dust after a hydrogen explosion shattered the building’s exterior structure in March 2011.

Dismantling it is a first step toward removing spent fuel rods stored in a cooling pool above the reactor. That, in turn, must be completed before the reactor core can be opened to remove the melted-down fuel, according to Tokyo Electric Power Co.

On Friday morning, plant workers used a crane to remove a huge panel to see whether anti-dispersal agents are taking effect. They were inserted last week to reduce the risk of radioactive dust blowing out.

No changes in radiation levels have been observed around the plant so far, the company said.

Tepco will continue observations for a month to make sure radioactive materials are not emerging and then put the panel back again. It plans to begin full-fledged work on dismantling the cover next March.

Once the whole cover is removed, Tepco hopes to be able to clear debris lying on the structure’s upper levels.

The company then plans to begin removing spent fuel rods from the pool — in 2019 at the earliest — and later to try to extract the melted fuel from the reactor itself.

The reactor 1 building cover was installed in October 2011 as an emergency response to the rain sluicing radioactive materials down and the wind picking up contaminated dust.

Tepco initially planned to begin removal preparations by the end of last March but was forced to delay the schedule after local residents voiced concern about the contamination of rice fields nearby.


Tepco: http://photo.tepco.co.jp/date/2014/201410-j/141031-01j.html

Japan Times: http://www.japantimes.co.jp/news/2014/10/31/national/tepco-cracks-open-weather-shield-covering-reactor-building-fukushima-1/#.VFOkP_nF8rk

Yomiuri Shimbun:  http://the-japan-news.com/news/article/0001684852